Maverick

IF YOU OWN OUR GEN3 CARRIER BEARING THIS NEW GREASE WHIP IS A MUST HAVE!!!

Do you like that you can service your GEN3 carrier bearing, but dread crawling under your RZR to remove the skid plates to access the carrier?

Problem solved!!! Just insert the grease tube into the carrier bearing and you can run the whip right through your center console!

*FITS ALL SANDCRAFT CARRIER BEARINGS

WE ARE THE ONLY COMPANY IN THE WORLD WITH THIS DESIGN SO DON’T WASTE YOUR TIME WITH THE COPYCATS.

SANDCRAFT Motorsports has developed the only true solution for driveline vibration and premature wear. The SANDCRAFT Carrier Bearings use the patented auto set angle feature to correct the driveline angle across multiple UTV platforms. Correcting the driveline angle results in less wear on the output of the transmission and the input of the front differential by eliminating side loading of the bearings. The Carrier Bearing extends the life of the drivetrain. Our Carrier Bearings are fully GREASABLE while having 3 layers of protection to keep dirt, sand, mud and water out. The 2-piece design will dramatically lower installation time and routine maintenance. Correcting the angle of your driveline has never been easier.

WHY PATENT A CARRIER BEARING?
The Carrier Bearing is only part of what we’re correcting with our patent. Your stock driveline angle is severely skewed. This means each joint is experiencing unneeded stress on every rotation. This extreme angle causes loss of power, noise and premature failure. The SANDCRAFT Carrier Bearing is a critical upgrade because it straightens the driveline to the optimal position, re-gains the lost power and improves the entire drivetrain. NOBODY ELSE CORRECTS THIS PROBLEM.

CARRIER BEARING – 2020-2022 PRO XP 2 SEAT

These links are built using 0.120" Wall Chromoly using heat treated ends and cut to length for the X3 72" models. Both ends are Right-hand threaded for securing the heims in place and ensuring they do not back. These Heavy Duty link replacements are mainly used for strengthening up your X3 over stock components, or make you race ready to finish the race.

Link Set Contains:

• (6) 0.120" Wall Chromoly Links cut to length for 2 uppers, 2 middle and 2 lower links
• (12) 5/8-18 RH Heims with jam nuts
• Mis-alignment spacers

NOTE: You will reuse the OEM fasteners

Add strength while improving ground clearance.

 Kit Contains: 
2 Lower High Clearance link bars
2 Middle Link bars
2 Upper Link bars
12 5/8-18 RH Heims with jam nuts
12 Back plate side mis-alignment spacers
12 knuckle/wheel side mis-alignment spacer

Can-AM Maverick X3 XDS 64" O.E.M. Replacement Trailing arm Kit. Fits 2 and 4 Seat Models.

To take the already impressive X3 one step further, HCR has developed an American - made product to look, feel and function better than factory. The HCR X3 suspension kit is designed as an OEM Factory replacement kit for the 64" X DS models. The HCR signature High Clearance Trailing arm design increases ground clearance 1.5 inches under key components. Approach angles have been improved for reduced surface attraction and friction.

 MAV-05300-2 64" Rear Suspension Kit includes: 2 Rear Trailing Arms, brake line mounting hardware, and shock bolts.

Note: For this kit you will need to reuse or replace with OEM/aftermarket components: Trailing arm Radial joints, mounting bolts and hardware otherwise not provided.

NOTE: 14" WHEELS WILL NOT FIT

Add clearance, strength and appeal to your Can Am X3 64" with the HCR OEM Elite trailing arms. This true boxed kit follows the HCR Elite portfolio while adding to the aggressive stance of the  X3.

• High clearance Trailing Arm design allows for added ground clearance under key components. 

• Manufactured with HCR Elite Alloy; 30% stronger than 4130 Series Chromoly 

• Internal catacomb design allow for increased strength from hollow factory design . 

• Comparable weight to factory with added structure. 

 NOTE: 14" WHEELS WILL NOT FIT

ALLOW 1-2 WEEKS FOR POWDER COAT, CALL FOR CURRENT LEAD TIMES

 The MAV-05200-2 64" Trailing Arm kitincludes: 2 Rear Trailing Arms, brake line mounting hardware, and shock bolts.

NOTE: For this kit you will need to reuse or replace with OEM/aftermarket components: Trailing arm Radial joints, mounting bolts and hardware otherwise not provided.

Product image shown not representative of all configurations. Vehicle specific fitment will change offset, dish and center profile. Please call 435-828-3411 if you have any questions on fitment or specific details.

Our Universal Rock Light Kit takes the guess work out of buying wiring and trying to figure out how to pin relays. All of the lengths are pre-cut to reach all four corners of your small to mid-sized vehicle with some wiggle room on each lead to route the wiring any desired way. This kit includes four 400 lumen rock lights and wiring for a truly turn key kit.

These LED lights are waterproof and can be mounted virtually anywhere. All that is needed is 12 volt power. They have a 180 degree optic to illuminate your wheel wells or anywhere else you need a bright and smooth light.

Caution: Rock Light can get very hot when used for long periods of time. Please use caution when handling or installing.

Available Colors:

• Amber
• Blue
• Green
• Red
• White

Included With Kit:

• Wiring Harness
• x4 Rock Lights

NOTE: These lights will only work with a 12 volt charging system.

Our 2” harnesses are the absolute safest belts for your UTV, SXS, or any vehicle. With sewn in shoulder pads the comfort is always there. Great for kids or trail riding! For serious riding see our 3” 5 Point Harnesses. Can be used without the crotch strap if preferred.

Although compact at 3” by 3”, don’t be fooled by its size, the Squadron Pro IR 850nm LED light is more powerful than most larger lights on the market today. This light is perfect for covert applications such as military, and hunting.

950 nm Specifications:
LED: 4 Osram 940nm LEDs
mW: 3960mW
mW/sr: 1700mW/sr
Weight: 12 ounces
Wattage/Amps/Volts: 11W, .80A at 13.80Vdc, .40A at 27.6Vdc
Dimensions: 3.07” x 2.76” x 3.07”
LED Life Expectancy: 49,930 Hours
Front Lens: Hard Coated Polycarbonate
Housing: Aircraft Grade Aluminum w/Mil-Spec Hard Anodize
Bezel: Billet Machined Aluminum
Hardware & Bracket Material: Stainless Steel
Built-In Overvoltage Protection
Exceeds MIL-STD810G (Mil-Spec Testing)
IP69K (Waterproof up to 9ft & Pressure Washable)
IK10 Compliant (Mechanical Impact Testing)

Includes:

• Squadron Pro, IR LED Light
• Mounting Bracket

UTV RTL CanAm Maverick X3, Polaris RZR 1000 Wiring Harness

This harness was designed for someone looking for a harness that is long enough to reach the mounting location of your RTL on your two or four seat Can-Am or RZR. The harness comes equipped with high quality sheathing and a relay to power all the functions; running light, brake, and cargo/reverse light. If you have purchased an RTL-S please purchase harness 64-0111 which will include a rectangular rocker switch to plug into your factory dash.

UTV RTL-S Turn Signal Harness

The harness comes complete with a red backlit rocker switch which flashes to indicate the direction you are turning. This switch is designed to install directly into your factory dash location. There is also another switch which gives you a dust light option illuminating amber lights simultaneously. This harness must be used in combination with the 64-0116.

The S2 Sport features the same quality, fit, and finish that is synonymous with the Baja Designs name, at an attractive price point. The S2 Sport is ideal as a fog, cornering, rack, or reverse light and much more. A compact and powerful light, featuring quality that is second to none.

Includes:

• S2 Sport LED Light
• Mounting Bracket

Patterns:

Driving/Combo: Maximum trail coverage in a single light. The Driving/Combo pattern is equipped with both Driving (42°) and spot (9°) optics to provide you with a smooth blend of light for both near field applications and distance (Lighting Zone 3)

Wide Cornering: BD was the first to develop a pattern specifically for cornering, dust and/or fog conditions. The Wide Driving pattern offers a 42° flattened horizontal beam for the ultimate in comfort lighting. (Lighting Zones 1 & 2)

Spot: A longer and narrower 9° beam focus for illumination further down the trail or road. The Spot pattern is designed to be used in conjunction with additional Wide Driving and/or Driving/Combo beam lights. (Lighting Zone 4 & 5)

Work/Scene: Excellent work light or “scene light” with an extremely smooth 120° circle that projects about 40ft. This pattern is not suitable for driving. (Lighting Zone 7)

Take your UTV side by side to the next level with our Baja Designs UTV vehicle specific mounting kits. This kit comes equipped with a pair of Squadron Pro LED lights that will truly light up the night at 9,800 lumens at 80 watts. Whether you’re looking for more trail coverage or just need more light for outdoor working conditions, these Squadron Pro LED lights have you covered.

Includes:

• (2) Squadron® Pro LED Lights
• Mounts Specified to Selection
• Wiring Harness

Patterns:

Driving/Combo: Maximum trail coverage in a single light. The Driving/Combo pattern is equipped with both Driving (10°) and Spot (9°) optics to provide you with a smooth blend of light for both near field applications and distance (Lighting Zone 3)

The XL Sport makes it easy to light up your world in style, with the perfect combination of affordability and performance. The XL Sport LED light utilizes our trademarked High Speed Spot reflectors providing for a longer beam pattern. The XL Sport provides the same top of the line performance and aesthetics you expect from BD in an affordable solution. All Baja Designs LEDs are backed by a 30 Day Satisfaction Guarantee & Limited Lifetime Warranty for the ultimate in purchase protection.

Note: A Skene dimmer must be purchased separately to enable the high/low feature.

Includes:

• XL Sport LED Light
• Mounting Bracket

Patterns:

Driving/Combo: Maximum trail coverage in a single light. The Driving/Combo pattern is equipped with both Wide Driving (44°) and spot (6°) optics to provide you with a smooth blend of light for both near field applications and distance (Lighting Zone 3)

Wide Cornering: BD was the first to develop a pattern specifically for cornering, dust and/or fog conditions. The Wide Driving pattern offers a 44° flattened horizontal beam for the ultimate in comfort lighting. (Lighting Zones 1 & 2)

High Speed Spot: A longer and narrower 6° beam focus for illumination further down the trail or road. The Spot pattern is designed to be used in conjunction with additional Wide Driving and/or Driving/Combo beam lights. (Lighting Zone 4 & 5)

With a higher lumen count and lower power draw of 40 watts, the XL-R series is the only single housing LED auxiliary light on the market that has the distance of an 8” HID with the smooth spread of an LED. The XL Pro LED light utilizes our trademarked High Speed Spot reflectors providing for a longer beam pattern, and offers a 50% dimming feature. Perfect for enthusiasts that need a vast amount of light and are looking for something other than a light bar. An industry first 30 Day Satisfaction Guarantee & Limited Lifetime Warranty is included for the ultimate in purchase protection.

Patterns:

Driving/Combo: Maximum trail coverage in a single light. The Driving/Combo pattern is equipped with both Wide Driving (44°) and spot (6°) optics to provide you with a smooth blend of light for both near field applications and distance (Lighting Zone 3)

Wide Cornering: BD was the first to develop a pattern specifically for cornering, dust and/or fog conditions. The Wide Driving pattern offers a 44° flattened horizontal beam for the ultimate in comfort lighting. (Lighting Zones 1 & 2)

High Speed Spot: A longer and narrower 6° beam focus for illumination further down the trail or road. The Spot pattern is designed to be used in conjunction with additional Wide Driving and/or Driving/Combo beam lights. (Lighting Zone 4 & 5)

Squadron Racer Racer Edition
Baja Designs is proud to introduce the Squadron Racer Edition, with 4,300 lumens. The Squadron Racer Edition throws light an average of 40% further than the Squadron Pro with High-intensity LED, housed in hard anodized and powder coat cast aluminum. Enjoy nearly 50,000 hours of bright, efficient lighting to enhance your nighttime off-roading experiences! As always, Baja Designs provides the best in auxiliary LED lights with a 30 Day Satisfaction Guarantee, and Limited Lifetime Warranty.

Includes:
· Squadron Racer Edition LED Light
· Mounting Bracket


Patterns:

Spot: A longer and narrower 7° beam focus for illumination further down the trail or road. The Spot pattern is designed to be used in conjunction with additional Wide Driving and/or Driving/Combo beam lights.

Squadron-R Pro

Baja Designs' latest LED light bar comes with a few new perks! Enjoy the clean aluminum frame with 6,328 lumens of pure power, low amp draw of 4.06 amps, and nearly 50,000 hours of LED life. The S8 also features upgraded reflectors, an amber backlit feature, and new scalloped housing design. The S8 is backed by our 30 Day Satisfaction Guarantee and Limited Lifetime Warranty giving you the ultimate in purchase protection!

Includes:
· S8 10” LED Light Bar
· Mounting Brackets

Please note that this light does NOT include a harness and the applicable harness to this light is 640115

Patterns:

Driving/Combo: Maximum trail coverage in a single light. The Driving/Combo pattern is equipped with both Driving (42°) and spot (9°) optics to provide you with a smooth blend of light for both near field applications and distance (Lighting Zone 3)

Wide Driving: BD was the first to develop a pattern specifically for cornering, dust and/or fog conditions. The Wide Driving pattern offers a 42° flattened horizontal beam for the ultimate in comfort lighting. (Lighting Zones 1 & 2)

Spot: A longer and narrower 9° beam focus for illumination further down the trail or road. The Spot pattern is designed to be used in conjunction with additional Wide Driving and/or Driving/Combo beam lights. (Lighting Zone 4 & 5)

Work/Scene: Excellent work light or “scene light” with an extremely smooth 120° circle that projects about 40ft. This pattern is not suitable for driving. (Lighting Zone 7)

Complete harness for Baja Designs XL (Pro & Sport) LED Light.

This harness takes all the guess work out of installation and is incredibly high quality suited for race use!

This harness allows you to use the high beam or toggle switch to turn on the LED light.

Features:

• Includes Toggle switch for On/Off and Momentary button for dim mode.
• Heavy duty wire gauge.
• Complete with battery ring terminals, relay, sheathing, fuse.
• 100" wire length between battery ring terminals and weatherpack for bumper or roof mounting.

Includes:

• (1) XL (Pro & Sport) Wire Harness w/Mode-2 lights max 325 watts (64-0119)
• (1) OnX6/XL (Pro & Sport) Wiring Harness Splitter - adds 1 light (61-3608)